Exhaust flanges, gaskets & hw, Page 11

Exhaust throttle controlled wirelessly. Pipe diameter - 76 mm

Muffler RM MOTORS JEEP COMMANDER V8 5.7 2006-2010COMMANDER (XK, XH) 5.7 HEMI 4x4 (EZH) 5654ccm 347KM / 255kW 2009 / 06-2010 / 12 5.7 V8 4x4 (EZB) 5654ccm 326HP / 240kW 2005 / 09-2010 / 12Muffler to be welded on in place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected so that the assembly of the silencer is as easy as possible. Model: E002 / 60/450

A device for wireless control of exhaust valves (throttles). Enables control of exhaust gas flow and exhaust volume. 

A device for wireless control of exhaust valves (throttles). Enables control of exhaust gas flow and exhaust volume. 

BMW E46 M3, M3 CSL S54 end silencer 2000-2006 343/360 bhpRWD Pipe diameter - 76 mm

Hamburger knee made of stainless steel.The product is covered by a 24-month manufacturer's warranty.

Exhalation valve (throttle) Enables control of exhaust gas flow and exhaust volume. 

Hamburger knee made of stainless steel. The product is covered by a 24-month manufacturer's warranty.

High quality RST v-bands 2.5" up to 5".

A simple weldable lambda nut for adding a lambda fitting to an exhaust. Also available as stainless steel.

Steel 10 mm flanges for Garrett and Holset turbocharger inlet, outlet and oil fittings.

A small y-joint to use in headers or manifold joints for example.

Exhaust sleeves to use in joining different pipe diameters in palces where an actual cone reducer wont fit.

Exhaust reducers in stainless or mild steel.Models with three diameters can be cut to fit a pipe with the middle diameter as well.An exhaust pipe reducer allows a diameter change with minimal flow restrictions.

Fits inside a 2.5" exhaust tubing. When installed at the end of an exhaust system, helps lower especially low frequency noise.Total length 285mm.

Vacuum exhaust valves allow mild sounds while streeting, and roaring exhaust sounds on the track.A valve can open and close the exhaust flow. Examples of use are a screamer pipe directly after the downpipe, or a muffler bypass.

High quality DIY straight and angle parts for exhaust. Many parts are also available in stainless steel.

Reinz MLS exhaust manifold gasket for the Nissan VQ-series engines. Durable and reusable.

Thicker threads and body assure these exhaust U-clamps wont shear threads or bend like the usual single-use clamps.

High quality Simons RST exhaust clamps also for heavy use.

Weldable exhaust flanges in most common sizes like 2.5 and 3". Thickness is 10mm and flanges are made of mild-steel.

2- and 3-bolt exhaust gaskets from 2 to 3.5" sizes.

OE quality exhaust manifold gasket for Nissan SR20DET engine.

RM Motors ZRM90 exhaust flexible connector