OBP AN10 - CPE Rubber Inner Braided Hose St/St (PER METER)

Product number: OBP-CPE-H10

Designed for motorsport and fast road use, the CPE is perhaps the most widely used range of lines and fittings. The CPE hose is a true double braided stainless hose that uses the highest quality stainless wire available.

It is produced by using a reinforced CPE synthetic rubber liner which is then wrapped in a double stainless steel external braid to give extra resistance to any abrasion.

When locating fuel or oil lines inside any vehicle cabin, we recommend using the PTFE hose & fittings range which is produced with PTFE inner lining.

Available in AN4, AN6, AN8, AN10, AN12 & AN16 Options

-40° to 150°C Temperature Operating Range

AN4 CPE Hose:

ID – 5.4mm
OD – 11.2mm
Operating Pressure – 1000psi
Burst Pressure – 6000psi
AN6 CPE Hose:

ID – 8.7mm
OD – 14.20mm
Operating Pressure – 1000psi
Burst Pressure – 6000psi
AN8 CPE Hose:

ID – 11.10mm
OD – 17.10mm
Operating Pressure – 1000psi
Burst Pressure – 5000psi
AN10 CPE Hose:

ID – 14.20mm
OD – 20.80mm
Operating Pressure – 1000psi
Burst Pressure – 5000psi
AN12 CPE Hose:

ID – 17.40mm
OD – 24.40mm
Operating Pressure – 1000psi
Burst Pressure – 3750psi
AN16 CPE HOSE:

ID – 22.20 mm
OD – 30.50 mm
Operating Pressure – 750psi
Burst Pressure – 2,500psi

OBP

Optimum Balance Products offer pedalboxes and hydraulic handbrakes.

Visit manufacturers home page