Top 100 sold

Eibach wheel bolts from 3.00 €

181item(s)from 3.00 €
Eibach wheel bolts
From the drop down menu, you can find the right bolt for you easily. Types with flat-head, round-head and taper-head (60 degree).Also Loose head for taper and round-head available.The length is always the length of the thread, not the overall bolt length.Strength grade 10.9

Copper lock nuts from 2.00 €

4item(s)from 2.00 €
Copper lock nuts
Copper locking nuts for a tight sealLeaking exhausts are a common problem. A leaking sound, low boost pressure and a failed emission test are all problems which can be caused by a leaking exhaust.Copper locking nuts are the best nuts you can use, because they dont come loose like their iron cousins due to thermal expansion.Especially turbo gaskets will also fail quickly after the bolts have come loose, and that will result in a kind of screaming sound.The copper locking nuts are stocked and readily

K&N replacement filters from 47.00 €

5702item(s)from 47.00 €
K&N replacement filters
The air filter cleans air the engine needs to burn fuel, but there are different filters on the market - some flow and clean better and some worse. K&N filters both clean and flow much better than an original paper filter or cheap imitations.More power and less consumption? The engine sucks air through the filter, and when a filter flows better less power and thus fuel is used to suck air through the filter, and in turn can be used as horsepower to accelerate.The most popular upgrade to any car Because

Exhaust flanges from 9.00 €

7item(s)from 9.00 €
Exhaust flanges
Weldable exhaust flanges These weldable mild-steel flanges are laser-cut, and offer an easy way of making quality joints for custom exhausts.Mild-steel is the best option for flanges since it has minimal deformation compared to stainless steel flanges. Basically most factory-made stainless exhausts also have mild-steel flanges.Thickness is 10 mm. The flanges are sold per piece, so please order two for each full joint.In addition to these we offer copper locking nuts, exhaust gaskets, and affordable cat

Quaife ATB differentials from 709.00 €

969item(s)from 709.00 €
Quaife ATB differentials
Quaife ATB is the best street & trackday limited slip differential available. It is silent, reliable and comes with a lifetime warranty. Works like a charm on a daily and if neccessary transforms it into a track monster. BMW and Mercedes differentials are now also listed here.

Eibach wheel nuts from 2.00 €

16item(s)from 2.00 €
Eibach wheel nuts
Types can be selected with the drop down menu, type (open or closed.), thread and length.Especially recommended to make sure the thread length, if using closed nut (so the nut really thightens to wheel).Listed length is thread length. Listed length is total length in open nuts. Closed nuts lengths is listed length + 2mm.

Race.Fi oilcoolers 13 and 25 rows from 79.00 €

2item(s)from 79.00 €
Race.Fi oilcoolers 13 and 25 rows
The Race.Fi oil coolers are ideal for engine, transmission or diff coolers. The oil coolers also fit our filter relocation kits and our oil coolers kits.Pipe fitting: AN8 Stock sizes 13 and 25 row coolers.13-row cooler Core-size: Height 100mm, width 290mm. Overall size: Height 130mm, width 330mm.25-row cooler Core-size: Height 200mm, width 290mm. Overall size: Height: 230mm, width 330mm.In addition you might also be interested in our oil filter relocation kit or the oil cooler kit which include

ACL race series bearings from 59.00 €

40item(s)from 59.00 €
ACL race series bearings
The unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Tri-metal Hardened steel back -engine bearings.Designed to withstand higher RPM conditions, ACL Race Series Engine Bearings are available for many of the popular 4, 6 & 8 cylinder applications and feature:1. High strenght overlay plate with reduced thickness 2. Hardened steel backs on all conrod bearings 3. Increased crush and elimination of flash plating 4. Tight consistant wal

Billet throttle bodies 65 - 100mm from 129.00 €

5item(s)from 129.00 €
Billet throttle bodies 65 - 100mm
Billet throttlebody with 65, 70, 80, 90 or 100mm ID. The throttlebody is used to allow more air into the engine when the gas pedal is pressed. A bigger throttlebody allows more air into the engine especially with upgraded intake manifolds. Throttle response is also increased due to a larger bore.This can be used to make an adapter plate to fit other bolt patterns or welded to the existing manifold.A bracket for a Bosch tps is included, but any tps can be made to fit with some craftmanship. The bracket ca

Stri DSD clear lens 52/60mm from 134.00 €

52item(s)from 134.00 €
Stri DSD clear lens 52/60mm
Stri DSD-SLM II series gauges.Properties:-a Fast and precise servo guarantees a precise reading in harsh conditions like rally or track racing too. -The STRI gauges servo motor is quiet in operation unlike many cheaper gauges. -Self check. -Automatic calibration on every start. -A warning for incorrect wireing or sensor propblems. -User-set warning theresholds. -Peak reading recall. -270 -degree sweep. -Gorgeous aluminum casing.DSD Gauges min/max values:-Boost gauge: 735mmHg ~ 2.0 kg/cm2 (m

T-Bolt clamps from 2.40 €

3item(s)from 2.40 €
T-Bolt clamps
Our stainless steel T-Bolt clamps ensure the pipework wont slip or leak on the critical moment. Our T-Bolt clamps have a wide band which means the clamps have less risk of harming silicone couplers by "sinking" into the coupler.When you order T-Bolt clamps, please not that most of the time silicone couplers are sold by the inner diameter. You need to consider the wall thickness of couplers too. Generally the walls add 6 to 20mm to the diameter, meaning a 3" ID coupler actually has a 3,25" to 3,75" outer diame

K&N universal cone filters from 80.00 €

4item(s)from 80.00 €
K&N universal cone filters
K&N universal cone filter The K&N Cones are an obvious choice for your car.Can be washed, lasts for the life of your car. Unrivalled flow - even megawatt power cars have K&N filters. Provides clean air for your engine even though it still flows. Suitable for both naturally aspirated and turbo cars.Cleaning and re-oiling a K&N filter Easy piecy, here's how.

K&N Oil filters from 9.00 €

1657item(s)from 9.00 €
K&N Oil filters
K&N oil filters for premium cars and motorcycles are quickly reached consumers, the popularity of its durability and easy removal thanks. Most of the filters from the nut is facilitating disconnecting.Extremely durable filter for extremely demanding use For the K & N oil filter to fulfill the requirements of racing use, in many aspects, and the filter characteristics of the attached special attention. The shell material of the filter is normal thicker, so that the stones breakages et al. Strikes would be small

Bilstein spare parts from 8.00 €

15item(s)from 8.00 €
Bilstein spare parts
Bilstein is the top of the line shock manufacturer. This article lists the basic spare parts as well as spare shocks for bilstein coilover suspensions.The availability for these is mostly stock, and if not in stock 1 to 3 working days.

Magnaflow performance catalytic converters, gasoline 2" - 3" from 137.00 €

5item(s)from 137.00 €
Magnaflow performance catalytic converters, gasoline 2" - 3"
Clean power with a Magnaflow catalyzer A catalyzer cleans exhaust gasses flowing through it, however most original units are clogged and considerably restrict flow thus further restricting the power of the engine.Free flowing exhaust and minimum emissions? Thats not a daydream, thats a Magnaflow catalyzer. Magnaflow power catalyzers are a must for all serious exhaust upgrades or a DIY exhaust build.In fact, the original catalyzer is usually the most restrictive part of an original exhaust, so you will noti

Mishimoto electric fans from 63.00 €

7item(s)from 63.00 €
Mishimoto electric fans
An electric fan is a compact way to ensure radiator cooling. Mishimoto high-volume fans are both compact and come with an unmatched flow rate.Thickness and airflow (cfm = cubic feet/minute) 8": 3.12" / 79mm, 600 cfm 10": 2.36" / 59mm, 950 cfm 12": 2.50" / 63mm, 1150 cfm 14": 2.65" / 67mm, 1300 cfm 16": 2.87" / 72mm, 1850 cfmFans from 10" to 16" can also be reversed to suck or blow depending on the installation side.

Mishimoto Intercoolers from 171.00 €

19item(s)from 171.00 €
Mishimoto Intercoolers
Compressor pressurizing the air temperature can reach closer to 200 degrees. The cooler the air is, the more air can be confined to the engine - the temperature rises without volume increases. Intercooler task is therefore cooled and crystallized be summarized thus reaching the engine air.Intercooler cools better exchange and flowing intercooler significantly improve the performance of the engine. The new intercooler the flow resistance is smaller and the turbo or supercharger thong produced by the hot charge a

Seatrails and attachment parts from 33.00 €

7item(s)from 33.00 €
Seatrails and attachment parts
Down the mounting rails and Fixing the style slide rails or bolted to the page mounts.Sliding rail kit, 271mm - Universal - Sparco slide rail kit Sport-bench - Length: 271mm - Manufactured by Sparcoside seat mounts, 290mm. - Length: 360mm - 3mm thick steel - Manufactured by Sabelt

Thermotec heat blankets from 22.90 €

6item(s)from 22.90 €
Thermotec heat blankets
Heat carpets with sitcker Can be modified to engine-room or around wires and hoses.Takes up to 1100c constant heat. Available in 30x30cm and 30x60cm.Cool-It heat- and noise resenation mats Protectionmat for sound and heat insulation. Fits under hood, doors etc. Available in 61x122cm and 122cm x 122cm.

Thermotec heatwraps from 5.90 €

6item(s)from 5.90 €
Thermotec heatwraps
Thermotec heatwraps Thermotec heatwrap keeps engine-room temperatures down. Heatwrap is wrapped around exhaust manifold and it keeps most of the heat in exhaust gas.Thermotec wraps available in 15meter rolls and in 1 meter slices. Width 1 and 2 inches.- Can take 1100'c constant heat. Thickness below 2mm.Thermotec heatwrap material required Heat wrap required per meter of straight pipe. The lengths are advisory only, and for a straight pipe. Bends, collectors, lambda fittings and a changing diameter

Boost controller BC1 from 49.00 €

1item(s)from 49.00 €
Boost controller BC1
A bleed valve to rise boost pressure Most turbo cars have a wastegate which regulates boost pressure. By lowering the regulating pressure with a bleed valve, the boost pressure going to the engine can be increased.Our bleed is capable of bleeding out air and regulating the pressure going to the wastegate. This is one of our top selling items and most of the time is in stock.

Stri DSD smoke lens 52/60mm from 134.00 €

36item(s)from 134.00 €
Stri DSD smoke lens 52/60mm
Stri DSD-SLM II series gauges.Properties:-a Fast and precise servo guarantees a precise reading in harsh conditions like rally or track racing too. -The STRI gauges servo motor is quiet in operation unlike many cheaper gauges. -Self check. -Automatic calibration on every start. -A warning for incorrect wireing or sensor propblems. -User-set warning theresholds. -Peak reading recall. -270 -degree sweep. -Gorgeous aluminum casing.DSD Gauges min/max values:-Boost gauge: 735mmHg ~ 2.0 kg/cm2 (m

K&N intake kits from 103.00 €

1677item(s)from 103.00 €
K&N intake kits
K&N Air Filters 57I also include a suction tube, and features include. The Well more power and acceleration, eg. 53 PS more 2007 Shelby Ford Mustang GT500 model Includes a washable, conical K & N Performance air filter. Easy to install K&N Million-Mail Limited Warranty ®Cleaning and re-oiling a K&N filter Easy piecy, here's how.

Clampco V-bands from 35.00 €

8item(s)from 35.00 €
Clampco V-bands
Clampco V-bands Clampco V-bands matches original-quality and is made by USA manufacturer, Clampco.In racing use high quality band means solid fitment and quick release for maintenance.Also available as stainless steel, AISI 304 flanges, as well as with old black flanges.

Oil filter relocation kit from 169.00 €

1item(s)from 169.00 €
Oil filter relocation kit
Oil filter relocation and oil cooler kit. Our kit includes the hardware needed to relocate oil filter, and if neccessary intall an oil cooler.The kit includes two flanges, one which bolts in place of the original filter, and one which the filter is relocated to. Three braided hoses are included, so if you wish an oil cooler can also be installed.The flange has two 1/8 NPT sensor holes, where sensors for oil pressure and temperature gauges can be installed. AN8 fittings.The kit is compatible with cars

Mishmoto T-bolt from 5.00 €

10item(s)from 5.00 €
Mishmoto T-bolt
Mishimoto T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm-gear clamps. You can be sure that everything will stay in place because Mishimoto Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.

Adjustable dump valve DV1, Race.Fi from 59.00 €

1item(s)from 59.00 €
Adjustable dump valve DV1, Race.Fi
A dump valve releases excess pressure when the throttle body closes. Without a dump valve the excess pressure would flow in the wrong direction through the turbocharger slowing it down or even damaging it in the worst case.This is an affordable adjustable basic valve for cars with up to 300 hp. The dump is adjustable, and releases the pressure in the atmosphere.The kit includes vacuum hoses and a gasket for the flange.Flange bolt (M6) distance 60mm. Flange hole diameter 30mm.The outlet side has a th

Nissan Skyline RB25DET intake manifold, Race.Fi from 249.00 €

1item(s)from 249.00 €
Nissan Skyline RB25DET intake manifold, Race.Fi
RB25DET RB26-style intake manifold A properly flowing intake manifold for the Nissan RB25 DET engine. The kit changes the position of the throttle body to face forward like the RB26 manifolds. This kit is essential with front mount intercoolers, or when you're cleaning up the engine compartment. Having a front facing throttle body allows for shorter and cooler intake pipes when used with a front mount intercooler.This manifold is made for a bigger throttle body, so the stock body either needs modifying or you

Xtreme Clutch kits from 325.00 €

91item(s)from 325.00 €
Xtreme Clutch kits
Xtreme Clutch kits offer loads of quality and hold for high-torque cars with still decent prices. In addition to 2- and 3-plate kits single disc-kits are available with organic or sintered discs.Generally the most popular Xtreme Clutch kits are available in 2 working days, or 1 to 2 weeks from our European stocks.Xtreme also makes flywheels, and is actually Australia's biggest manufacturer for dual mass flywheel conversion kits.Single-disc kits are supplied with the disc, cover, release bearing and asse

Cometic MLS head gaskets Bmw, Mitsubishi, Nissan, Subaru, Toyota and Volvo from 79.00 €

25item(s)from 79.00 €
Cometic MLS head gaskets Bmw, Mitsubishi, Nissan, Subaru, Toyota and Volvo
Cometic MLS head gaskets An MLS head gasket is in all ways a superior choice compared to an original gasket. When engine power increases the pressure and stress on the the gasket also increses. Cometic ensures the gasket wont fail.The Cometic MLS gaskets are an affordable an in all ways proven product to upgrade the headgasket. They are also reusable.This article lists the most popular Cometic gaskets we sell. Other models are available from our sales.

HellermanTyton Electric tapes from 2.00 €

3item(s)from 2.00 €
HellermanTyton Electric tapes
High-quality electric- and insulation tape HellermannTyton tapes are durable yet flexible with a strong glue. The tapes are ideal for protecting threads and wires.This tape is also flame-retardant so it is safe close to exhausts. Unlike regular tapes, these tapes are actually thick and stick to what they are taped to. For harsh conditions like protecting coilover threads we suggest using the black 19mm wide 0.2mm thick version.

Black Diamond clutches from 272.00 €

18573item(s)from 272.00 €
Black Diamond clutches
The black diamond clutch kits offer a close to stock clutch feeling and a good bang for the buck when you are looking for a replacement clutch for your car with minor modifications.The clutch kits include both the disc and the pressure plate.We also carry other clutch brands like Clutch Masters, Sachs SRE and Xtreme Clutch. The most popular Sachs SRE clutch covers, ARP flywheel bolts, release bearings and braided clutch hoses are also a part of our selection.

Accessory belts Nissan, Toyota from 10.20 €

23item(s)from 10.20 €
Accessory belts Nissan, Toyota
Accessory belts Gates and Contitech accessory belts are available for almost any car. The most popular models are listed in our webshop, and the rest are available from our sales.For models in the webshop, please select your car make and model from the dropdown.The listed belts are mainly stock items, and the rest are available within a few working days.Notes Aircon = Airconditioning belt. Powersteering = Powersteering belt. WP = Water pump belt. Alternator = Alternator belt.

Bimecc loose collar wheel bolts M12 from 3.10 €

2item(s)from 3.10 €
Bimecc loose collar wheel bolts M12
Loose collar eccentric wheel bolts allow fitting wheel with different pcd, for example 5x100 on a car with 5x112. Maximum change is +-2.4mm, so in theory a 5x110 car could have up to 5x112.4 / 5x107.6mm wheels.Eccentric bolts are available as M12x1.25 30mm M12x1.25 34mm M14x1.5 30mmKey 19mm Head diameter 28mm 60 deg. cone Finish: Zinc plated Sold per piece

Japan racing JR-3 wheels from 121.00 €

232item(s)from 121.00 €
Japan racing JR-3 wheels
Laadukkaat vanteet laatutietoiselle harrastajalle. Suuren keskusvaraston myötä, useimmat vanteet valmiina nopealle toimitukselle, arviolta 4-7 arkipäivää tilauksesta.Osaa malleista saatavilla myös custom porauksella ja custom offsetillä, nämä löydät suoraan verkkokaupastamme: Individual / custom poraukset / ET.

Bosch LSU4.2 and LSU4.9 wideband sensor from 90.00 €

2item(s)from 90.00 €
Bosch LSU4.2 and LSU4.9 wideband sensor
Bosch 4.2 and 4.9 wideband lambda sensors. Fits Vems rounds and many other devices as well as cars.Bosch LSU 4.2 and LSU 4.9 sensors are available. Please check which sensor your device uses, as the sensors are not interchangeable.Both sensors mount on a M18x1.5 thread.These are stock products like most gauges as well.

Exhaust diy parts from 3.60 €

120item(s)from 3.60 €
Exhaust diy parts
Exhaust DIY parts include straight pipes, reducers as well as regular and tight angles in stainless or mild steel.You can filter the list by selecting the material and diameter. Reducers are also shown on the same list if they fit the selected diameter.All pipes are Scandinavian quality.We also carry all other exhaust flanges, clamps, gaskets, silencers and catalyzers.

OEM oilfilters from 9.00 €

16item(s)from 9.00 €
OEM oilfilters
High quality OEM oil filters keep oil clean long. Oil fiters are basically available for all cars. Some of the most usual filters are listed here.Some of the filters f.ex. 200SX SR20DET Black Top vs. Red Top, have the thread mentioned as there are 2 different threads used on the same engine.

Race.Fi hood/hatch locks from 59.00 €

1item(s)from 59.00 €
Race.Fi hood/hatch locks
Aerocatch style hood locks (pair) In race cars being able to completely remove or open the hood from outside is important for safety and pitwork, and in some cases compulsory in class rules.The lock is opened by first pressing the smaller lever, then rising the longer lever. Closing is done by pushing down the longer lever.Installation The locks are mounted on the hood with six chamfered bolts, and fastened from below with nuts. The counterpart, the shaft, is mounted in the engine bay, and it's length i

Holset HX40 Super turbo from 799.00 €

3item(s)from 799.00 €
Holset HX40 Super turbo
The Holset HX40 Super has reached nearly 700 horse power in gasoline applications. Diesel Applications 400hv. Engined, 1.8-3.0 liters. Super HX40 turbocharger, for example, is a popular Supra 2JZ-GTE, Nissan RB-Series and BMW 6 turbo-charged engines turbo.Holset HX40 super Compressor 60/86mm. Turbine 75/65mm. Turbine options 14cm²-16cm²-18cm² (twin entry), 6-bolt outlet. 1.8 - 3.0 litres engines. Nearly 700hp in petrol engines and nearly 400hp in diesel.Turbocharger A turbocharger pressurizes air usi

ARP flywheel bolts from 48.90 €

8item(s)from 48.90 €
ARP flywheel bolts
ARP flywheel bolts are reusable and wont stretch. These are a good option to add when upgrading a clutch or building a high-power engine.All other ARP bolts are also available. We also carry clutch brands like Clutch Masters, Sachs SRE, Black Diamond and Xtreme Clutch. The most popular Sachs SRE clutch covers, release bearings and braided clutch hoses are also a part of our selection.

Aeroflow in-tank pumps (also for ethanol) from 150.00 €

2item(s)from 150.00 €
Aeroflow in-tank pumps (also for ethanol)
The pump flows up to 500hp, and is suitable for E85 ethanol use thanks to ceramic internals.A fuel pump takes care of delivering enough fuel to the engine. No fuel pump lasts for ever, so a high-volume pump is one of the most essential upgrades for a tuned engine.Aeroflow 255 lph » Designed for gasoline (not for E85) » Good for up to 500hp engines.Aeroflow 325 lph E85 pump Also an internal pump which works with ethanol and is also tested with methanol. Delivered without an install kit.This is a d