SM-Pro is a combined sensor module for accurately measuring Vac/Boost, Exhaust Gas Temperature, Air Intake Temperature, Fluid (Oil/Water) Temperature, and Fluid Pressure.
Includes genuine Honeywell 3Bar Vac/Boost sensor (built-in), wires/connectors for digital interface with DM-6, DM-100/200, MultiGauge Link. Also includes analog outputs for interfacing with 3rd party ECU's and data loggers.
*Please note, SM-PRO comes with ONLY the Vac/Boost sensor built-in. To measure Fluid Temp, Exhaust Temp, Air Temp, and Fluid Pressure, please add the appropriate sensors from accessories section below. Description
The SM-Pro combines the leading industry's aftermarket sensors into one control module. Out of the box, SM-Pro can measure 3Bar Vac/Boost with the built-in genuine Honeywell sensor. Simply add additional sensors from the accessories section below to obtain Fluid Temp, Exhaust Gas Temp, Air Temp, and Fluid Pressure readings.
SM-Pro automatically detects sensors that are connected and streams data via the digital output interface to the DM-6 MultiGauge or MultiGauge Link for display on your Apple/Android smart device. Each sensors is digitally monitored and refreshed at 10Hz (10 times/second) for exceptional accuracy and smoother gauge movement.Features
1: 9-25VDC power from vehicle's battery
2: For connecting power to DM-6 MultiGauge and/or MultiGauge Link Smartphone Adapter
3: Eight 0-5V analog outputs for interface with 3rd party data loggers/ECUs
4: Termination jumper. Install if it is the end module in digital daisy-chain. Remove if not end module in digital daisy-chain.
5/6: Digital input (rx) /output (tx) for digital interface with display modules like DM-6, DM-100/200, MultiGauge Link
7: Two Fluid Temp inputs for VDO resistive type sensors. Measurement range of 32 - 302 degrees Fahrenheit or 0 - 150 degrees Celsius
8: Two Fluid Pressure inputs. Measurement range 0 - 150 PSI or 0 - 10.5 kg/cm^2.
9: Two Air Intake Temp/Exhaust Gas Temp for use with K-Type thermocouple probes. Measurement range is from 32 - 1873 degrees Fahrenheit or 0 - 1023 degrees Celsius for EGT. Measurement range of 32 - 631 degrees Fahrenheit or 0 - 333 degrees Celsius for AIT
10: One 3 Bar Honeywell Vac/Boost sensor. Measurement range is 30.5 inHg to 30 PSI or 760 mmHg to 2.11 Kg/cm^2.Included Items SM-PRO main unitGenuine Honeywell 3 BAR Vac/Boost Sensor Built-inSensor Module Connect Kit (4ft power wire with 2.1mm connector, 4ft Analog wires and connector with 4 terminals, 1ft Serial Cable, 4 Pin connector for SM-AFR connectivity, 2 Terminals for 4 pin Connector)Termination jumperUser Manual*Other sensors sold separately
Race Performance Ltd
Välitie 6, 07170 Pornainen, Finland
☎ 020 790 2 790
☛ www.race.fiOur team: Riku, Jaana, Willem and AriRead here who we are and what we're about: about us.