High quality aluminium locking lug nuts.- Fits vehicles equipped with M12 x 1.5 wheel studs - Crafted from a single piece of 7075-T6 aircraft-quality aluminium - Extremely lightweight, each weighing only 0.8 oz / 22.68 g - Includes 16 standard lug nuts, four locking lug nuts, and one key - Open-ended design with a total length of 50mm - Ultimate tensile strength: 74,000–78,000 psi - Minimum yield strength: 63,000–69,000 psi - Available in anodized finishes of black, blue, silver, red, or neo chromeIN
Bolts & nuts, Page 1
Hex female flush-fit wheel nuts. Really small hex female wheel nuts which allows you to safely bolt without scratching the wheels.
Japan Racing eccentric bolts for PCD changes like 5x114.3 to 5x112. Fitted with torx sockets, key included.
Loose collar eccentric wheel bolts allow fitting wheel with different pcd, for example 5x100 on a car with 5x112. Maximum change is +-2.4mm, so in theory a 5x110 car could have up to 5x112.4 / 5x107.6mm wheels.Eccentric bolts are available as M12x1.25 30mm M12x1.25 34mm M14x1.5 30mmKey 19mm Head diameter 28mm 60 deg. cone Finish: Zinc plated Sold per piece
From the drop down menu you can find the bolt thread and the length. Also there is specified the diameter of the heads rifling.Eibach bolts are grade 10.9 strength.
From the drop down menu, you can find the right bolt for you easily. Types with flat-head, round-head and taper-head (60 degree).Also Loose head for taper and round-head available.The length is always the length of the thread, not the overall bolt length.Strength grade 10.9
Heavy duty fender roller The ET+ fender roller is a sturdy choice which fits most 4- and 5-lug wheel hubs. The arm length is adjustable from 355 mm to 575 mm, so it is a real multipurpose roller.The kit includes the roller it's self, a set of spigot rings to center the tool, and suitable washers which allow fastening with the original wheel bolts.When you do have room in the fenders, we also carry Eibach Pro-Spacers and aluminum Titan wheel nuts.
Types can be selected with the drop down menu, type (open or closed.), thread and length.Especially recommended to make sure the thread length, if using closed nut (so the nut really thightens to wheel).Listed length is thread length. Listed length is total length in open nuts. Closed nuts lengths is listed length + 2mm.