Turbosmart's 38 mm Ultra-Gate is the smallest external waste gate in the range. Thanks to it's small size, it reacts lightning fast and keep boost pressures super steady.
Turbocharged parts, Page 3
The 40 mm Turbosmart Comp-Gate is a compact waste gate designed to fit in tight spaces and withstand very high temperatures. V-band mounted.
Holset HX40 Super turbo is the choice with a wide power band and power for demanding builds. The Holset HX40 Super can reach up to 700 hp outputs.
The HX50 MFS (Milled From Solid) offers an output of 650 to 750 hp and is recommended for engine from 2.0 to 3.0 liters. It's compressor is milled from a single alloy block.Holset HX50 MFS specs Compressor 67/98mm Billet compressor wheel Turbine 85/72mm Turbine housing 19cm² (twin entry) 6-boltNote: We ship all Holset chargers with a Holset original parts gasket kit.We're an authorized Holset dealer Which means, all Holset turbochargers bough from us are always new genuine products and have passe
The Water cooled Holset HX35 full race is a turbocharger for race use. Recommended engine dispplacements from 1.6 to 2.2 liters and power range from 400 to 500 hp.Holset HX35 Full Race specs Compressor 54/77mm Turbine70/60mm Watercooled housing Turbine housing 14cm² (twin entry) V-bandNote: We ship all Holset chargers with a Holset original parts gasket kit.We're an authorized Holset dealer Which means, all Holset turbochargers bough from us are always new genuine products and have passed Holset'
The watercooled Holset HX35 II turbocharger has capability from 300 to 500 horsepower. For racing, rally and time attack turbocharger. Engine capacity of 1.5 to 2.5 litresHolset HX35 II specs Compressor: 54/77mm Turbine 70/60mm Watercooled BH Turbinecase 12cm2 (twin entry) V-bandNote: We ship all Holset chargers with a Holset original parts gasket kit.We're an authorized Holset dealer Which means, all Holset turbochargers bough from us are always new genuine products and have passed Holset's prec
The Holset HX35 is designed for a power range of 300 to 500 hp. Thanks to the Holset HX35's simple oil-cooled construction it is ideal for use in motorcycles as well. The Holset HX35 is ideal with engines from 1.8 to 2.5 liters.
Garrett and Holset turbocharger gaskets for inlet, outlet and oil fittings.
A bleed valve to rise boost pressure Most turbo cars have a wastegate which regulates boost pressure. By lowering the regulating pressure with a bleed valve, the boost pressure going to the engine can be increased.Our bleed is capable of bleeding out air and regulating the pressure going to the wastegate. This is one of our top selling items and most of the time is in stock.
The DV4 dump valve is a hose-type atmospheric dump valve with a crisp swoosh sound.The kit includes a set of springs which allow adjustment of how easily the dump valve opens. Fitting 25mm hose.We also have other Race.Fi dump valves, Turbosmart dump valves as well as turbochargers and intercoolers.
An affordable bypass which can be installed as a bypass to recirculate boost to the intake pipe, or as atmospheric.Fitting diameter is 25mm. The kit includes a set of springs which enable you to adjust how easily the dump opens. It is also possible to fine-tune the opreation with shims.We also have other Race.Fi dump valves, Turbosmart dump valves as well as turbochargers and intercoolers.
A small and compact, adjustable dump valve with a 25 mm hose fitting.
A dump valve releases excess pressure when the throttle body closes. Without a dump valve the excess pressure would flow in the wrong direction through the turbocharger slowing it down or even damaging it in the worst case.This is an affordable adjustable basic valve for cars with up to 300 hp. The dump is adjustable, and releases the pressure in the atmosphere.The kit includes vacuum hoses and a gasket for the flange.Flange bolt (M6) distance 60mm. Flange hole diameter 30mm.The outlet side has a th