Brisk turbo DS plugs for turbocharged competition engines and hard-to-ignite fuels.
Fuel & ignition, Page 2
The legendary Bosch 044 fuel pump for internal or external installation. This is a high-flow pump which is very often found on high-power setups.Usually a stock product.Please also check all other fuel pumps in our shop. Brands include Aeroflow, Walbro and Bosch.
Walbro 255lph fuel pump for cars up to 450 - 500 HP A fuel pump takes care of the gasoline supplied to the engine, and creates the pressure which is further regulated by the pressure regulator. An original pump is usually worn out, and especially in tuned cars it will struggle to make enougn pressure and flow. Not having enough gasoline will cause a lean (not enough fuel) mixture, which in turn causes power loss and detonation which can quickly break the engine.The Walbro fuel pump flows at 255 LPH (Litres Pe
Fuel filter, 8mm hose A fuel filter gathers small particles like rust and dust from the fuel so it doesnt clog the injectors or pressure regulator. The filter gradually gets clogged, and at some point it needs replacement or it starts to cause problems in fuel delivery.This filters is originally found the Nissan 300zx Twin Turbo, and some other high power cars. The "flow" is basically the same as a 8mm hose, so this filter is good for most applications.In addition, we also have Walbro pumps, an adjustabler
Siemens DEKA 630cc injectors.Our injectors are matched sets within 1% of each other. These are high-ohm (12,6 ohm) injectors, and for example in the Nissan CA18DET the injector resistor should be bypassed.O-ring to O-ring length 64mm.Flow: 630cc/min @ 3bar 727cc/min @ 4barOther names / codes for this injector: -Siemens FI114961 -Mototron INJ-GAS-006 -Accel 74620L -MSD/Edge 2030