Engine & trans, Page 6

Engine & trans, Page 6

Forged pistons, cams, gaskets, differentials and transmissions - everything for the engine & transmission

Performance parts for the engine and transmission are in this category. Parts are divided into their own subcategories.

We offer over a 100 quality brands. If you can't find what you're looking for or need a quote on a set of parts, contact our sales!

K&N Oil filters from 9.00 €

1649item(s)from 9.00 €
K&N Oil filters
K&N oil filters for premium cars and motorcycles are quickly reached consumers, the popularity of its durability and easy removal thanks. Most of the filters from the nut is facilitating disconnecting.Extremely durable filter for extremely demanding use For the K & N oil filter to fulfill the requirements of racing use, in many aspects, and the filter characteristics of the attached special attention. The shell material of the filter is normal thicker, so that the stones breakages et al. Strikes would be small
» Buy or view items

K&N replacement filters from 47.00 €

5702item(s)from 47.00 €
K&N replacement filters
The air filter cleans air the engine needs to burn fuel, but there are different filters on the market - some flow and clean better and some worse. K&N filters both clean and flow much better than an original paper filter or cheap imitations.More power and less consumption? The engine sucks air through the filter, and when a filter flows better less power and thus fuel is used to suck air through the filter, and in turn can be used as horsepower to accelerate.The most popular upgrade to any car Because
» Buy or view items

Aeroflow in-tank pumps (also for ethanol) from 110.00 €

2item(s)from 110.00 €
Aeroflow in-tank pumps (also for ethanol)
The pump flows up to 500hp, and is suitable for E85 ethanol use thanks to ceramic internals.A fuel pump takes care of delivering enough fuel to the engine. No fuel pump lasts for ever, so a high-volume pump is one of the most essential upgrades for a tuned engine.Aeroflow 255 lph » Designed for gasoline (not for E85) » Good for up to 500hp engines.Aeroflow 325 lph E85 pump Also an internal pump which works with ethanol and is also tested with methanol. Delivered without an install kit.This is a d
» Buy or view items

Black Diamond braided clutch hoses from 30.00 €

42item(s)from 30.00 €
Black Diamond braided clutch hoses
A stronger and more rigid braided clutch hose is an essential upgrade when a stiffer clutch cover is used, or you want the precision of clutch usage to be at it's maximum.We also carry many clutch brands like Clutch Masters, Sachs SRE, Black Diamond and Xtreme Clutch. The most popular Sachs SRE clutch covers, ARP flywheel bolts and release bearings are also a part of our selection.
» Buy or view items

Black Diamond clutches from 272.00 €

18573item(s)from 272.00 €
Black Diamond clutches
The black diamond clutch kits offer a close to stock clutch feeling and a good bang for the buck when you are looking for a replacement clutch for your car with minor modifications.The clutch kits include both the disc and the pressure plate.We also carry other clutch brands like Clutch Masters, Sachs SRE and Xtreme Clutch. The most popular Sachs SRE clutch covers, ARP flywheel bolts, release bearings and braided clutch hoses are also a part of our selection.
» Buy or view items

Cusco radiator caps from 29.00 €

1item(s)from 29.00 €
Cusco radiator caps
Radiator caps The radiator caps purpose is to maintain a certain pressure in the coolant system. When the cap pressure is exceeded, the cap releases the pressure into the expansion tank. When the coolant cools down forming a negative pressure, the cap allows the flow back into the system.High pressure caps The original caps are usually rated to 0.7 - 0.9 bar. Cusco caps are rated at 1.3 bar.The boiling point of water raises by pressure: 0.0 bar: 100,0 C (atmospheric pressure) 0,7 bar: 115,4 C 1.0 bar:
» Buy or view items

ARP flywheel bolts from 48.90 €

8item(s)from 48.90 €
ARP flywheel bolts
ARP flywheel bolts are reusable and wont stretch. These are a good option to add when upgrading a clutch or building a high-power engine.All other ARP bolts are also available. We also carry clutch brands like Clutch Masters, Sachs SRE, Black Diamond and Xtreme Clutch. The most popular Sachs SRE clutch covers, release bearings and braided clutch hoses are also a part of our selection.
» Buy or view items

ARP Head bolts from 179.00 €

8item(s)from 179.00 €
ARP Head bolts
Head bolts / studs A crucial component in the engine, which keeps the head and head gasket in a constant proper tension. Most original bolts are intended for single use.ARP Head bolts ARP's bolts are reusable, and are the strongest bolt available on the market. To avoid head gasket problems in any high power build, these are an essential part on any engine.We offer all ARP bolts quickly, the most popular items are listed here. If you dont see your application on the list, please ask our sales.All othe
» Buy or view items

Xtreme Clutch kits from 325.00 €

94item(s)from 325.00 €
Xtreme Clutch kits
Xtreme Clutch kits offer loads of quality and hold for high-torque cars with still decent prices. In addition to 2- and 3-plate kits single disc-kits are available with organic or sintered discs.Generally the most popular Xtreme Clutch kits are available in 2 working days, or 1 to 2 weeks from our European stocks.Xtreme also makes flywheels, and is actually Australia's biggest manufacturer for dual mass flywheel conversion kits.Single-disc kits are supplied with the disc, cover, release bearing and asse
» Buy or view items

Holset HX40 Super turbo from 790.00 €

3item(s)from 790.00 €
Holset HX40 Super turbo
The Holset HX40 Super has reached nearly 700 horse power in gasoline applications. Diesel Applications 400hv. Engined, 1.8-3.0 liters. Super HX40 turbocharger, for example, is a popular Supra 2JZ-GTE, Nissan RB-Series and BMW 6 turbo-charged engines turbo.Holset HX40 super Compressor 60/86mm. Turbine 75/65mm. Turbine options 14cm²-16cm²-18cm² (twin entry). All turbines have a T3 twin entry flange. 14cm²-16cm² turbines use a 6-bolt outlet flange. 18cm² turbine uses a 4-bolt outlet flange. 1.8 - 3.0 lite
» Buy or view items

Holset HX50 MFS turbo from 999.00 €

1item(s)from 999.00 €
Holset HX50 MFS turbo
The HX50 MFS (Milled From Solid) offers an output of 650 to 750 hp and is recommended for engine from 2.0 to 3.0 liters. It's compressor is milled from a single alloy block.Holset HX50 MFS specs Compressor 67/98mm Billet compressor wheel Turbine 85/72mm Turbine housing 19cm² (twin entry) 6-boltNote: We ship all Holset chargers with a Holset original parts gasket kit.We're an authorized Holset dealer Which means, all Holset turbochargers bough from us are always new genuine products and have passe
» Buy or view items

Holset HX35FR turbo from 799.00 €

1item(s)from 799.00 €
Holset HX35FR turbo
The Water cooled Holset HX35 full race is a turbocharger for race use. Recommended engine dispplacements from 1.6 to 2.2 liters and power range from 400 to 500 hp.Holset HX35 Full Race specs Compressor 54/77mm Turbine70/60mm Watercooled housing Turbine housing 14cm² (twin entry) V-bandNote: We ship all Holset chargers with a Holset original parts gasket kit.We're an authorized Holset dealer Which means, all Holset turbochargers bough from us are always new genuine products and have passed Holset'
» Buy or view items

Holset HX35 II turbo from 799.00 €

1item(s)from 799.00 €
Holset HX35 II turbo
The watercooled Holset HX35 II turbocharger has capability from 300 to 500 horsepower. For racing, rally and time attack turbocharger. Engine capacity of 1.5 to 2.5 litresHolset HX35 II specs Compressor: 54/77mm Turbine 70/60mm Watercooled BH Turbinecase 12cm2 (twin entry) V-bandNote: We ship all Holset chargers with a Holset original parts gasket kit.We're an authorized Holset dealer Which means, all Holset turbochargers bough from us are always new genuine products and have passed Holset's prec
» Buy or view items

Exhaust flanges from 9.00 €

7item(s)from 9.00 €
Exhaust flanges
Weldable exhaust flanges These weldable mild-steel flanges are laser-cut, and offer an easy way of making quality joints for custom exhausts.Mild-steel is the best option for flanges since it has minimal deformation compared to stainless steel flanges. Basically most factory-made stainless exhausts also have mild-steel flanges.Thickness is 10 mm. The flanges are sold per piece, so please order two for each full joint.In addition to these we offer copper locking nuts, exhaust gaskets, and affordable cat
» Buy or view items

Aeroflow external fuelpump from 119.00 €

1item(s)from 119.00 €
Aeroflow external fuelpump
Aeroflow external fuel pump for up to 650 hpThis aeroflow pump is an external model which is suitable for engine with up to 650hp. The pump's external dimensions are the same as a boch 044, which make it an excellent high power replacement.A fuel pump takes care of delivering enough fuel to the engine. No fuel pump lasts for ever, so a high-volume pump is one of the most essential upgrades for a tuned engine.Aeroflow external fuel pump specs: » Suitable for both gasoline and E85 applications. » Same d
» Buy or view items